Cozad 110t v1.0 FS19

该拖车最多可拖运 110 短吨（220,000 磅，千克）
可用甲板长度为 28 英尺，但可以延长至 28 英尺。它重 114,100 磅（公斤）

特点：
吉普车：
内部和外部框架的独立颜色选择
桥接点的可配置位置。
所有软管均通过动态软管或 3d 模型建模

前桥：
内部和外部框架的独立颜色选择
手动转向轮组（被认为是第 2 组）
通过按下折叠键/按钮自动居中
所有软管通过动态软管或 3d 模型建模

前鹅颈管：
内框架和外框架的独立颜色选择
液压塔可通过鼠标右键向上/向下移动 可
配置的泛光灯（前向、后向或两者）
所有软管均通过动态软管或 3d 模型建模

主拖车：
内框架和外框架的独立颜色选择
通过鼠标右键向上/向下移动液压塔 可
配置的泛光灯（前向、后向或两者）
自动转向轴组 3 和 5
手动转向轴组 3 和 5
自动使用折叠键/按钮转向居中器
所有软管均通过动态软管或 3d 模型建模 可
配置的甲板延伸件（7 英尺、14 英尺、21 英尺和 28 英尺）
适用于所有甲板长度的可配置支腿

运输模式（最适用于甲板扩展）：

1. 从主拖车上卸下鹅颈管
2. 驾驶吉普车并桥上主拖车
3. 从吉普车断开
4. 转到主拖车转向平台并进入拖车
5. 使用鼠标中键 (AXIS_FRONTLOADER_TOOL5 ）翻转甲板前下方的主销并降低碰撞，这将允许您在下方连接卡车。
6. 将主拖车连接到卡车
7. 提高碰撞
   反向执行步骤，使拖车准备好装载。

The trailer can hauling up 110 short tons (220000 pounds, kg)
Available deck 28 feet in length, but can be extended to 28 feet. It weighs 114100 pounds (kg)

Features:
The jeep:
Independent of the external and internal framework color choices
Contact the bridge can be configured.
All hose through modeling dynamic hose or 3 d model

Front axle.
Independent of the external and internal framework color choices
Manual steering wheel (group is considered to be 2)
Automatically by the folding key/button in the middle
All hose through modeling dynamic hose or 3 d model

Gooseneck before:
Framework within and outside the framework of independent color choices
Hydraulic tower through the right mouse button up/down movement
Configuration of the floodlight (forward, backward, or both)
All hose through modeling dynamic hose or 3 d model

The trailer:
Framework within and outside the framework of independent color choices
Through the right mouse button up/down mobile hydraulic taco
Configuration of the floodlight (forward, backward, or both)
Automatic steering shaft group 3 and 5
Manual steering shaft group 3 and 5
Using automatic folding key/button to center
All hose through modeling dynamic hose or 3 d model
The deck extending configuration. (seven feet, 14 feet, 21 and 28 feet)
Apply to all deck configurable leg length

Transportation mode (extension) are best suited for deck:

1. Away from the main trailer gooseneck
2. A jeep and bridge on the trailer
3. Disconnect from the jeep
4. Go to the trailer to the platform and into the trailer
5. Use the middle mouse button (AXIS_FRONTLOADER_TOOL5) flip before the king pin and reduce collision below deck, this will allow you to connect below truck.
6. Connect the main trailer truck
7. Improve the collision
   Reverse step, make the trailer ready for loading.

QQ3119607905 QQ群719993035

模拟农场19拖车